Fat extraction system

SX-6 MP
Fat extraction system. Suitable to extract solved products in solvent using methods Soxhlet and Randall. Compatible with a wide range of samples.

Contact

FAT EXTRACTION SYSTEM – SX-6

Intended use

  • Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibers, rubbers, textiles, petrochemical products, pharmaceutical products, etc.

Features

  • Outer case made of stainless steel painted with epoxy resin.
  • Heating by an electric plate with armoured heater to assure homogeneus distribution of heat.
  • Temperature control by microprocessor with P.I.D. action P.I.D. and Class A Pt100 probe.
  • Over temperature  safety control by independent thermocouple.
  • Vitón® seal set.

Advantages

  • Independent programming of “boiling” extraction time and “rinsing” extraction time.
 

Specifications

  • Working range of temperatures: room temperature +5 ºC to +250 ºC.
  • Solvent volume: up to 50 ml.
  • Sample max. volume: 25 ml.
  • Solvent recovery: 60-70%.
  • Reproducibility: ±1%.
  • Extraction cartridge Ø ext 26 × 60 mm.
  • “boiling” extraction time: 0-99 h.
  • “rinsing” extraction time: 0-99 h.
  • Extraction speed: 30-60 min.
  • Electric protection IP65.

Components supplied with the equipment

  • 18 extraction vessels + magnetig adapter.
  • Box containing 25 thimbles.
  • 7 thimbles support. Vessel extraction tong.
  • 3 racks for extraction cartridges.
  • 3 racks for extraction vessels.
  • Aligning rack.
  • Insertion handle.
  • EPDM seal set (6 units).

Reference Nº of samples L x D x H mm Reproducibility W Kg
SX-6 MP 6 680 x 310 x 590 ±1% 1500 46
Solvent Extraction temperature
Diethylic ether 100 ºC
Petroleum ether 100 ºC
Hexane 140 ºC
Cloroform 150 ºC
Trichloroethylene 190 ºC
Methanol 200 ºC
Ethanol 200 ºC
Toluene 200 ºC

Quotation request

ACCESSORIES

CD - box 25 extraction cartridges

CEX - extraction vessel