Vertical Floor-standing Medical Autoclaves with drying

AE-DRY-MD Series
Sterilization of non-wrapped solid products as clinical instruments, with optional drying program.
Sterilization of few wrapped solid products and little porous load, such as wrapped clinical instruments or wrapped hospital textile material, with optional drying program.
Sterilization of distilled water and non-medicinal liquid preparations, in open bottles.

Contact

AUTOCLAVES WITH DRYING – AE-DRY-MD SERIES

Advantages

  • Heart probe (optional).
  • Inlet in chamber for an external validation probe.
  • Programmable auto-start (24 h).
  • Connection to PC.
  • Control software (optional).
  • Optional printers: integrated (Ref. IT or IT-T) or external (Ref. ITS).

Features

  • Chamber case and lid made of AISI-316L stainless steel. External case and top made of AISI-304 stainless steel.
  • Total control by microprocessor.
  • Programs: 4 predefined and 6 user free.
  • Water tank for automatic feeding of the sterilization chamber.
  • Tank feed (optional).
  • RS-232 port to connect a printer or to a PC.
  • Protecting grid for the heaters.
  • Time range: 1 – 250 minutes.
  • Parameters setting: Sterilization temperature and time, Drying time.
  • Bacteriological filter for air inlet.

Safety

  • Safety valve and thermostat.
  • Hydraulic door blocking system while existing positive pressure in the chamber.
  • Open lid sensor.
  • Water level detector.

 

Special models

Available models with increased power to 3200W (AES-28-DRY-MD), 6000W (AE-50-DRY-MD, AE-75-DRY-MD and AE-110-DRY-MD) and 9000W (AE-110DRY and AE-150DRY). The equipments with increased power allow to reduce the total sterilization cycle time by shortening the heating phase particularly in autoclaves with a high workload.

AE-28 DRY-MD AE-50 DRY-MD AE-75 DRY-MD AE-110 DRY-MD AE-150 DRY-MD
Chamber dimensions Ø x H 300 x 400 mm 300 x 700 mm 400 x 600 mm 400 x 850 mm 500 x 750 mm
Chamber Volume total / usable 33/28 55/50 79/75 115/110 175/150
External dimensions L x D x H 505 x 580 x 1110 mm 505 x 580 x 1290 mm 610 x 700 x 1185 mm 610 x 700 x 1435 mm 750 x 820 x 1400 mm
Weight 90 Kg 110 Kg 140 Kg 180 Kg 265 Kg
Electrical voltage 2000 W 3200 W 3200 W 4500 W 6000 W
Tensión eléctrica* 230 (1P+N+E) V 230 (1P+N+E) V 230 (1P+N+E) V 400 (3P+N+E) V 400 (3P+N+E) V
Frequency 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz

* Other voltages supplies are available on request

 
All RAYPA medical autoclaves comply with ISO 13485: 2016 certification.
 

ACCESSORIES

CCI - Stainless steel basket

CV - Stainless steel wire basket

TBE - Stainless steel sterilization drum

SRA - Support with height adjustable shelves

KLL - Set automatic filling

PT-2 - Heart probe

PRENSACLAV - For calibration

IT - Integrated printer

ITS - Table top printer

SW7000 - Software

ELEV-CLAV - Baskets crane

TEST-CT - Sterilization control tape