Top-loading Benchtop Laboratory Autoclaves without drying

AVS-N Series
Suitable to sterilize culture medium, glassware, liquids, plastic, metal utensils and laboratory waste.

Technical data sheet

Installation Guide

Request a Quotation

Top-loading Benchtop Laboratory Autoclave without drying (8L) – AES-8

Features

  • Sterilization chamber made of 18/10 stainless steel. External housing made of AISI-304 stainless steel.
  • Equipment controlled by digital PID microprocessor, adjustable by time and temperature.
  • Alphanumeric LCD screen that shows sterilization parameters.
  • RS-232 port to connect to PC.
  • Manual valves for drainage and unsteaming.
  • Cycle time range: 0 – 500 h.
  • Manual filling of the sterilization chamber.
  • Protecting grid for the heater element.

Advantages

  • Compact and easy use.
  • Programmable auto-start (500 h).
  • Connection to PC.
  • Optional control software.

Safety

  • Safety valve and thermostat.
  • Open lid blocking system.

 

Components supplied

  • Stainless steel wire basket (CV-8).
 

Top-loading Benchtop Laboratory Autoclave without drying (15L) – AES-12

Features

  • Sterilization chamber made of AISI-316L stainless steel. External housing made of AISI-304 stainless steel.
  • Equipment controlled by digital PID microprocessor, with 4 predefined and 6 editable programs, adjustable by time and temperature.
  • Alphanumeric LCD screen that shows sterilization parameters, alerts and errors.
  • RS-232 port to connect PC or printer.
  • Manual filling of the sterilization chamber with water.
  • Protecting grid for the heater element.
  • Manual steam release push-button.
  • Manual valve to drain.
  • Cycle time range: 1-250 minutes.

Advantages

  • Agar mode (40 to 80 ºC) and programs for liquids.
  • Optional heart probe.
  • Inlet in chamber for an external validation probe.
  • Programmable auto-start (24 h).
  • Connection to PC.
  • Optional control software.
  • Optional integrated or external printers.

Safety

  • Safety valve and thermostat.
  • Hydraulic lid blocking system while positive pressure exists in the chamber.
  • Open lid sensor.

 

Components supplied

  • Stainless steel wire basket (CV-12).
 


modelsAES-8AES-12
Chamber volume total / usable8/6‚8 L15/13 L
Usable chamber dimensions Ø x H220 x 180 mm250 x 280 mm
Sterilization chamber water tank volume1‚3 L2‚2 L
Exterior dimensions L x D x H410 x 355 x 430 mm490 x 475 x 630 mm
Loading height320 mm435 mm
Power1000 W1000 W
Gross weight12 Kg38 Kg
Voltage*230V 16A230V 16A
Frequency 50/60 Hz50/60 Hz
Adjustable sterilization temperature100 – 127 ºC100 – 134 ºC
Adjustable sterilization time1 – ∞ min1 – 250 min
Max. pressure1‚5 barg2‚1 barg

*Other voltages available under request.

 

ACCESSORIES

CV
Stainless steel wire basket

PT-2
Flexible "heart" PT-100

PRENSACLAV
For autoclave calibration

IT
Integrated thermal printer (AES-12)

IT-M
Integrated dot matrix printer (AES-12)

ITS
Dot matrix table top printer (AES-12)

TEST-CT
Sterilization control tape

SW7000
PC connection