Automatic Autoclaves with Drying

Series AE-DRY

The AE DRY floor standing automatic vertical autoclaves with top loading access deliver great performance for general labware sterilization in many industries, educational and medical facilities and research institutes with the aim of increasing the productivity of the laboratory

The AE DRY autoclaves are intended for the sterilization of a wide range of solid materials such as unwrapped and wrapped items, small porous objects and hollow ware type B (slightly deep and broad cavities), glass, plastic, metallic objects and waste bags. The drying feature and the automatic water control level reduce operator time dedicated to the autoclave leading to facilitate the sterilization procedures in the general laboratory.

See datasheet

Contact

DIGITAL AUTOCLAVES WITH DRYING – SERIES AE-DRY

Intended use

  • Suitable to sterilize: Unwrapped solids, wrapped solids, small porous objects and hollow ware type B (slightly deep and broad cavities), glass, liquids, plastic, metallic ware, waste bags, etc.

 

Advantages

  • Agar mode (40 to 80 ºC).
  • Heart probe (optional).
  • Programmable auto-start (24 hours).
  • Heart probe (optional).
  • Built in or benchtop printer (optional).

Features

  • Chamber, lid, closure, top and external case made of AISI-304 stainless steel.
  • 
Total control by microprocessor: ten sterilization programs, six of them are user free.
  • Feeding water reservoir.
  • Automatic chamber filling.
  • Automatic drying.
  • It includes connection RS232 for PC/printer.
  • It includes inlet in chamber for an external validation probe.
  • Supplied with a protecting grid for heaters

Safety

  • Safety valve and thermostat.
  • Hydraulic door blocking system while existing positive pressure in the chamber.
  • Safety Pressure switch.
  • Open lid sensor.

 

Special models

Special models of AE-28DRY, AE-50DRY, AE-75DRY, AE-110DRY and c are available with increased power to 3200W (AE-28DRY), 6000W (AE-50DRY, AE-75DRY and AE-110DRY) and 9000W (AE-110DRY and AE-150DRY). The equipments with increased power allow to reduce the total sterilization cycle time by shortening the heating phase particularly in autoclaves with a high workload.

AE-28 DRY AE-50 DRY AE-75 DRY AE-110 DRY AE-150 DRY
Chamber dimensions Ø x H 300 x 400 mm 300 x 700 mm 400 x 600 mm 400 x 850 mm 500 x 750 mm
Chamber Volume total / usable 33/28 55/50 79/75 115/110 175/150
External dimensions L x D x H 505 x 580 x 1110 mm 505 x 580 x 1290 mm 610 x 700 x 1185 mm 610 x 700 x 1435 mm 750 x 820 x 1400 mm
Weight 90 Kg 110 Kg 140 Kg 180 Kg 265 Kg
Electrical voltage 2000 W 3200 W 3200 W 4500 W 6000 W
Tensión eléctrica* 230 (1P+N+E) V 230 (1P+N+E) V 230 (1P+N+E) V 400 (3P+N+E) V 400 (3P+N+E) V
Frequency 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz

* Other voltages supplies are available on request

 

Quotation request

ACCESSORIES

CI - Perforated stainless steel basket

CCI - Stainless steel basket

CV - Stainless steel wire basket

CEPP - Stainless steel cylinders to sterilize pipettes

CEP - Stainless steel cylinder to sterilize Petri dishes

TBE - Stainless steel sterilization drum

SRA - Support with height adjustable shelves

KLL - Set automatic filling

PT-2 - Heart probe

PRENSACLAV - For calibration

IT - Integrated printer

ITS - Table top printer

SW7000 - Software

ELEV-CLAV - Baskets crane

TEST-CT - Sterilization control tape